C613-50170-01 Rev B
Command Reference for x510 Series
2079
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
V
IRTUAL
C
HASSIS
S
TACKING
(VCS
TACK
™) C
OMMANDS
SHOW
STACK
show stack
Overview
Use this command to display summary information about current stack members.
Syntax
show stack
Mode
User Exec and Privileged Exec
Usage
This command displays summary information about current stack members. See
to display detailed stack information.
Example
To display summary information about the stack, use the command:
awplus#
show stack
Output
Figure 50-5:
Example output from the
show stack
command
Virtual Chassis Stacking summary information
ID Pending ID MAC address Priority Status Role
1 - 0000.cd28.07e1 128 Ready Active Master
2 - 0015.77c2.4d44 128 Ready Backup Member
3 - 0015.77c9.7464 128 Syncing Backup Member
4 - - - - Provisioned
Operational Status Normal operation
Stack MAC address 0000.cd28.07e1
Table 3:
Parameters in the output from the
show stack
command
Parameter
Description
ID
Stack-ID.
MAC
address
Stack member MAC address.
Priority
Stack member master election priority (between 0 and 255). Note
that the lowest number has the highest priority.
Role
Stack member’s role in the stack, this can be one of:
•
Active Master
•
Disabled Master
— this is the temporary master when there is a
communication break within the stack, but communication still
exists across the resiliency link. In this state all switch ports within
the stack are disabled by default, but a different configuration can
be run by a “type stack disabled-master” trigger.
•
Backup Member
— a device other than the stack master.
•
Provisioned
— indicates that the stack position is provisionally
configured, i.e. ready to accept a particular switch type into the
stack.
