Allied Telesis x510-28GPX, Справочник по командам

Страница: 355 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 355
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
C
ONNECTIVITY
F
AULT
M
ANAGEMENT
C
OMMANDS
SHOW ETHERNET CFM ERRORLOG
Related
Commands
clear ethernet cfm errorlog
ethernet cfm domain-name
ethernet cfm mep
mep crosscheck
service ma-name
Command
changes
Version 5.4.7-1.1: command added
Error Reason
One of the following:

“Remote MEP Down” - an RMEPCCMDefect has been
declared for this remote MEP. CCMs have not been
received from this remote MEP within the CCM interval.


“MEP Configuration” - the CCM received from the remote
MEP has the same MEP ID as the local MEP that received
the CCM. For unicast remote MEPs this error can also
indicate that even though the CCM received from the
remote MEP has an MEP ID that matches a configured
remote MEP ID in the MA, the source MAC address differs
from the configured MAC address for that remote MEP.


“Forwarding Loop” - the CCM received from the remote
MEP has an MEP ID that matches a configured local MEP ID
in the MA, and also has the same source MAC address as
the local MEP's MAC address that received the CCM.


“Cross Connected” - a xconCCMdefect was detected.
CFM Service Name
The name of the MA associated with the MD for this
error(s).
Table 9-3: Parameters in the output from show ethernet cfm errorlog domain
MD-INST2 (cont.)
Parameter Description