Allied Telesis x510-28GPX, Справочник по командам

Страница: 147 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 147
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
SHOW RUNNING
-
CONFIG
show running-config
Overview This command displays the current configuration of your device. Its output
includes all non-default configuration. The default settings are not displayed.
NOTE
: You can control the output by entering | or > at the end of the command:
• To display only lines that contain a particular word, enter:
| include < word>
• To start the display at the first line that contains a particular word, enter:
| begin < word>
• To save the output to a file, enter:
> < filename>
Syntax show running-config [full|< feature >]
Parameter Description
full
Display the running-config for all features. This is the default setting, so
it is the same as entering
show running-config .
< feature >
Display only the configuration for a single feature. The features
available depend on your device and will be some of the following list:
access-list ACL configuration
antivirus Antivirus configuration
application Application configuration
as-path Autonomous system path filter
configuration
as-path access-list Configuration of ACLs for AS path filtering
atmf Allied Telesis Management Framework
configuration
bgp Border Gateway Protocol (BGP)
configuration
community-list Community-list configuration
crypto Security-specific configuration
dhcp DHCP configuration
dpi Deep Packet Inspection configuration
entity Entity configuration
firewall Firewall configuration
interface Interface configuration. See show
running-config interface for further
options.