Allied Telesis x510-28GPX, Справочник по командам

Страница: 2796 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2796
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
ING
-P
OLLING
C
OMMANDS
SHOW PING
-
POLL

Poll 2:

Description : Secondary Gateway

Destination IP address : 192.168.0.100

Status : Up

Enabled : Yes

Source IP address : Default

Critical interval : 5

Normal interval : 60

Fail count : 20

Up count : 30

Sample size : 100

Length : 56

Timeout : 2

Debugging : Enabled

Table 67: Parameters in output of the show ping-poll command
Parameter Description
Description
Optional description set for the polling instance with the
description (ping-polling) command.
Destination
IP address
The IP address of the polled device, set with the ip (ping-polling)
command.
Status
The current status of the device being polled:
Up
The device is reachable.
Down
The device is unreachable.
Critic
a l Up
The device is reachable but recently the polling
instance has not received some ping replies, so the
polled device may be going down.
Critic
a l
Down
The device is unreachable but the polling instance
received a reply to the last ping packet, so the
polled device may be coming back up.
Enabled
Whether the polling instance is enabled or disabled. The active
(ping-polling) and active (ping-polling) commands enable and
disable a polling instance.
Source IP
address
The source IP address sent in the ping packets. This is set using
the
source-ip command.
Critical
interval
The time period in seconds between pings when the polling
instance has not received a reply to at least one ping, and when
the device is unreachable. This is set with the
critical-interval
command.
Normal
interval
The time period between pings when the device is reachable.
This is set with the
normal-interval command.