C613-50170-01 Rev B
Command Reference for x510 Series
715
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
INK
A
GGREGATION
C
OMMANDS
SHOW
ETHERCHANNEL
show etherchannel
Overview
Use this command to display information about a LACP channel specified by the
channel group number.
The command output also shows the thrash limiting status. If thrash limiting is
detected and the
action
vlan-disable
, the output will also show the VLANs on which thrashing is detected.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
, which is
available on our website at alliedtelesis.com.
Syntax
show etherchannel [
<1-32>
]
Mode
User Exec and Privileged Exec
Example
awplus#
show etherchannel
Output
Figure 18-3:
Example output from
show etherchannel
Example
awplus#
show etherchannel 1
Output
Figure 18-4:
Example output from
show etherchannel
for a particular channel
Parameter
Description
<
1-32
>
Channel-group number.
awplus#show etherchannel
LAG Maximum : 128
LAG Static Maximum: 96
LAG Dynamic Maximum: 32
LAG Static Count : 0
LAG Dynamic Count : 1
LAG Total Count : 1
Lacp Aggregator: po1
Member:
port1.0.5
port1.0.6
awplus#show etherchannel 1
Aggregator po1 (4601)
Mac address: 00:00:00:00:00:00
Admin Key: 0001 - Oper Key 0000
Receive link count: 0 - Transmit link count: 0
Individual: 0 - Ready: 0
Partner LAG: 0x0000,00-00-00-00-00-00
Link: port1.0.1 (5001) disabled
Link: port1.0.2 (5002) disabled
