Allied Telesis x510-28GPX, Справочник по командам

Страница: 554 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 554
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
WITCHING
C
OMMANDS
SHOW PORT
-
SECURITY INTRUSION
show port-security intrusion
Overview Use this command to show the intrusion list. If the port is not specified, the entire
intrusion table is shown.
Syntax show port-security intrusion [interface < port> ]
Mode Privileged Exec
Example To see the intrusion list on
port1.0.1
, use the following command:
awplus# show port-security intrusion interface port1.0.1
Output Figure 15-11: Example output from the show port-security intrusion command
for port 1.0.1
Related
Commands
clear port-security intrusion
show port-security interface
switchport port-security
switchport port-security aging
switchport port-security maximum
switchport port-security violation
Parameter Description
interface
Specify a port
< port >
The port to display information about. The port may be a switch
port (e.g.
port1.0.4
), a static channel group (e.g.
sa3
), or a
dynamic (LACP) channel group (e.g.
po4
).
Port Security Intrusion List

Interface: port1.0.1 -3 intrusion(s) detected

11-22-33-44-55-04 11-22-33-44-55-06 11-22-33-44-55-08