Allied Telesis x510-28GPX, Справочник по командам

Страница: 122 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 122
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
COPY RUNNING
-
CONFIG
copy running-config
Overview This command copies the running-config to a destination file, or copies a source
file into the running-config. Commands entered in the running-config do not
survive a device reboot unless they are saved in a configuration file.
Syntax
copy < source-name > running-config
copy running-config [< destination-name >]
copy running-config startup-config
Mode Privileged Exec
Examples To copy the
running-config
into the startup-config, use the command:
awplus# copy running-config startup-config
To copy the file
layer3.cfg
into the
running-config
, use the command:
awplus# copy layer3.cfg running-config
To use SCP to copy the running-config as
current.cfg
to the remote server
listening on TCP port 2000, use the command:
awplus# copy running-config
scp://user@server:2000/config_files/current.cfg
Related
Commands
copy startup-config
write file
write memory
Parameter Description
< source-name >
The filename and path of a configuration file. This must be
a valid configuration file with a
. cfg filename extension.
Specify this when you want the script in the file to become
the new running-config. See
Introduction on page 106 for
valid syntax.
< destination-name >
The filename and path where you would like the current
running-config saved. This command creates a file if no file
exists with the specified filename. If a file already exists,
then the CLI prompts you before overwriting the file. See
Introduction on page 106 for valid syntax. If you do not
specify a file name, the device saves the running-config to
a file called default.cfg.
startup-config
Copies the running-config into the file set as the current
startup-config file.