C613-50170-01 Rev B
Command Reference for x510 Series
288
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
SHOW
SYSTEM
MAC
show system mac
Overview
This command displays the physical MAC address available on a standalone switch
or a stack. This command also shows the virtual MAC address for a stack if the stack
virtual MAC address feature is enabled with the
command.
Syntax
show system mac
Mode
User Exec and Privileged Exec
Usage
For more information about the virtual MAC address feature, see the
Feature Overview and Configuration Guide
Example
To display the physical MAC address enter the following command:
awplus#
show system mac
Output
Figure 7-20:
Example output from the
show system mac
command
Output
Figure 7-21:
Example output showing how to use the
stack virtual-mac
command and the
show system mac
command
Related
Commands
awplus#show system mac
eccd.6d9d.4eed (system)
awplus#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
awplus(config)#stack virtual-mac
% Please check that the new MAC 0000.cd37.0065 is unique within
the network.
% Save the config and restart the system for this change to take
effect.
Member1#copy run start
Building configuration...
[OK]
Member1#reload
reboot system? (y/n): y
... Rebooting at user request ...
Loading default configuration ....
awplus login: manager
Password:
awplus>show system mac
eccd.6d9d.4eed
Virtual MAC Address 0000.cd37.0065
