C613-50170-01 Rev B
Command Reference for x510 Series
1040
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF C
OMMANDS
SHOW
IP
OSPF
show ip ospf
Overview
Use this command to display general information about all OSPF routing
processes. Include the process ID parameter with this command to display
information about specified instances.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip ospf
show ip ospf <
process-id
>
Mode
User Exec and Privileged Exec
Examples
To display general information about all OSPF routing processes, use the
command:
awplus#
show ip ospf
To display general information about OSPF routing process
100
, use the
command:
awplus#
show ip ospf 100
Parameter
Description
<
process-id
>
<
0-65535
> The ID of the router process for which information will
be displayed. If this parameter is included, only the information for
the specified routing process is displayed.
Table 1:
Example output from the
show ip ospf
command
Route Licence: Route : Limit=0, Allocated=0, Visible=0, Internal=0
Route Licence: Breach: Current=0, Watermark=0
Routing Process "ospf 10" with ID 192.168.1.1
Process uptime is 10 hours 24 minutes
Process bound to VRF default
Conforms to RFC2328, and RFC1583 Compatibility flag is disabled
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Graceful Restart
SPF schedule delay min 0.500 secs, SPF schedule delay max 50.0 secs
Refresh timer 10 secs
Number of incomming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of non-default external LSA 0
