Allied Telesis x510-28GPX, Справочник по командам

Страница: 2347 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2347
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW ATMF AUTHORIZATION
show atmf authorization
Overview Use this command on an AMF master to display the authorization status of other
AMF members and masters on the network.
On an AMF controller this command will show the authorization status of remote
area AMF masters.
Syntax
show atmf authorization {current|pending|provisional}
Mode Privileged Exec
Example To display all authorized AMF nodes on an AMF controller or AMF master, use the
command:
awplus# show atmf authorization current
To display AMF nodes which are requesting authorization on an AMF controller or
AMF master, use the command:
awplus# show atmf authorization pending
To display AMF nodes which have provisional authorization, use the command:
awplus# show atmf authorization provisional
Output Figure 54-10: Example output from show atmf authorization current
Parameter Description
current
Show the status of all authorized nodes.
pending
Show the status of unauthorized nodes in the pending queue.
These are nodes that enabled secure mode with
atmf
secure-mode but have not yet been authorized with atmf
authorize .
provisional
Show the status of provisionally authorized nodes. These are
nodes that have been provisioned with
atmf authorize provision .
NZ Authorized Nodes:

Node Name Signer Expires

----------------------------------------------------------------

master_1 master_1 4 Mar 2017

area_1_node_1 master_1 4 Mar 2017

area_1_node_2 master_1 4 Mar 2017