Allied Telesis x510-28GPX, Справочник по командам

Страница: 1365 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1365
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM C
OMMANDS
SHOW IP PIM SPARSE
-
MODE NEIGHBOR
show ip pim sparse-mode neighbor
Overview Use this command to show the PIM-SM neighbor information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax show ip pim sparse-mode neighbor [< interface >] [ <ip-address> ]
[detail]
Mode Privileged Exec
Examples
awplus# show ip pim sparse-mode neighbor
awplus# show ip pim sparse-mode neighbor vlan5 detail
Figure 33-10: Example output from the show ip pim sparse-mode neighbor
command
Figure 33-11: Example output from the show ip pim sparse-mode neighbor
interface detail command
Parameter Description
< interface >
Interface name (e.g.
vlan2
). Show neighbors on an interface.
< ip-address >
Show neighbors with a particular address on an interface. The IP
address entered in the form A.B.C.D.
detail
Show detailed information.
Neighbor Interface Uptime/Expires Ver DR

Address Priority/

Mode

10.10.0.9 vlan2 00:55:33/00:01:44 v2 1 /

10.10.0.136 vlan2 00:55:20/00:01:25 v2 1 /

10.10.0.172 vlan2 00:55:33/00:01:32 v2 1 / DR

192.168.0.100 vlan3 00:55:30/00:01:20 v2 N / DR

Nbr 10.10.3.180 (vlan5), DR

Expires in 55 seconds, uptime 00:00:15

Holdtime: 70 secs, T-bit: off, Lan delay: 1, Override interval:

3

DR priority: 100, Gen ID: 625159467,

Secondary addresses:

192.168.30.1
