C613-50170-01 Rev B
Command Reference for x510 Series
480
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
I
NTERFACE
C
OMMANDS
SHOW
INTERFACE
STATUS
Related
Commands
Table 15:
Parameters in the output from the
show interface status
command
Parameter
Description
Port
Name/Type of the interface.
Name
Description of the interface.
Status
The administrative and operational status of the interface; one of:
•
disabled: the interface is administratively down.
•
connect: the interface is operationally up.
•
notconnect: the interface is operationally down.
Vlan
VLAN type or VLAN IDs associated with the port:
•
When the VLAN mode is trunk, it displays
trunk
(it does not
display the VLAN IDs).
•
When the VLAN mode is access, it displays the VLAN ID.
•
When the VLAN mode is private promiscuous, it displays the
primary VLAN ID if it has one, and
promiscuous
if it does not
have a VLAN ID.
•
When the VLAN mode is private host, it displays the primary
and secondary VLAN IDs.
•
When the port is an Eth port, it displays
none
: there is no VLAN
associated with it.
•
When the VLAN is dynamically assigned, it displays the current
dynamically assigned VLAN ID (not the access VLAN ID), or
dynamic
if it has multiple VLANs dynamically assigned.
Duplex
The actual duplex mode of the interface, preceded by
a-
if it has
autonegotiated this duplex mode. If the port is disabled or not
connected, it displays the configured duplex setting.
Speed
The actual link speed of the interface, preceded by
a-
if it has
autonegotiated this speed. If the port is disabled or not
connected, it displays the configured speed setting.
Type
The type of interface, e.g. 1000BaseTX. For SFP bays, it displays
Unknown
if it does not recognize the type of SFP installed, or
Not
present
if an SFP is not installed or is faulty.
