C613-50170-01 Rev B
Command Reference for x510 Series
906
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
RIP C
OMMANDS
IP
RIP
AUTHENTICATION
MODE
ip rip authentication mode
Overview
Use this command to specify the type of authentication mode used for RIP v2
packets.
Use the
no
variant of this command to restore clear text authentication.
Syntax
ip rip authentication mode {md5|text}
no ip rip authentication mode
Default
Text authentication is enabled
Mode
Interface Configuration for a VLAN interface.
Usage
This command can only be used on VLAN interfaces.
The AlliedWare Plus™ implementation provides the choice of configuring
authentication for single key or multiple keys at different times. Use the
command for single key authentication. Use the
command for multiple keys authentication. See the
Feature Overview and Configuration Guide
for illustrated RIP configuration
examples.
Usage: single key
Use the following steps to configure a route to enable RIPv2 authentication using
a single key or password:
1)
Define the authentication string or password used by the key for the desired
interface, using the following commands:
awplus#
configure terminal
awplus(config)#
interface
<id>
awplus(config-if)#
ip rip authentication string
<auth-string>
2)
Specify the mode of authentication for the given interface (text or MD5),
using the following commands:
awplus#
configure terminal
awplus(config)#
interface
<id>
awplus(config-if)#
ip rip authentication mode {md5|text}
Parameter
Description
md5
Uses the keyed MD5 authentication algorithm.
text
Specifies clear text or simple password authentication.
