C613-50170-01 Rev B
Command Reference for x510 Series
747
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
OWER
OVER
E
THERNET
C
OMMANDS
SHOW
POWER
-
INLINE
INTERFACE
DETAIL
show power-inline interface detail
Overview
This command displays detailed information for one or more Power over Ethernet
(PoE) ports.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show power-inline interface [<
port-list
>] detail
Mode
User Exec and Privileged Exec
Usage
The power allocated to each port is listed in the
Power allocated
row, and is
limited by the maximum power per Powered Device (PD) class, or a user
configured power limit.
Examples
To display detailed PoE port specific information for the port range 1.0.1 to 1.0.3,
use the command:
awplus#
show power-inline interface port1.0.1-1.0.3 detail
Output
Figure 19-5:
Example output from
show power-inline interface detail
Parameter
Description
<
port-list
>
Enter the PoE port(s) to display information about only the specified
port or ports.
awplus#show power-inline interface port1.0.2 detail
Interface port1.0.2
Powered device type: Access Point #3
PoE admin: on
Configured Priority: Low
Actual Priority: Low
Detection status: Powered
Current power consumption: 6720 mW
Powered device class: 2
Power allocated: 7000 mW (from powered device class)
Detection of legacy devices is enabled
Powered pairs: Data
