Allied Telesis x510-28GPX, Справочник по командам

Страница: 1090 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1090
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF
V
3
FOR
IP
V
6 C
OMMANDS
AREA VIRTUAL
-
LINK AUTHENTICATION IPSEC SPI
area virtual-link authentication ipsec spi
Overview Use this command in Router Configuration mode to enable authentication for
virtual links in a specified OSPF area.
Use the no variant of this command in Router Configuration mode to disable
authentication for virtual links in a specified OSPF area.
Syntax
area < area-id > virtual-link < router-ID > authentication ipsec
spi < 256-4294967295 > {md5 < MD5-key >|sha1 < SHA1-key >}
no area < area-id > virtual-link < router-ID > authentication ipsec
spi < 256-4294967295 >
Mode Router Configuration
Usage Use this command on an OSPFv3 area virtual link, use the area authentication ipsec
spi command on an OSPFv3 area. Configure the same SPI (Security Parameters
Index) value on all interfaces that connect to the same link. SPI values are used by
Parameter Description
< area-id >
The OSPF area that you are specifying the summary route
default-cost for. This can be entered in either dotted decimal
format or normal decimal format. Use one of the following
formats:
<ip-addr>
OSPF area-ID expressed in IPv4 address
format A.B.C.D.
<0-
4294967295>
OSPF area-ID expressed as a decimal
number within the range shown.
For example, the values 0.0.1.2 and decimal 258 would both
define the same area-ID.
virtual-link
Specify a virtual link and its parameters.
< router-ID >
Enter a router ID associated with a virtual link neighbor in IPv4
address format A.B.C.D.
authentication
Specify this keyword to enable authentication.
ipsec
Specify this keyword to use IPsec authentication.
spi
Specify this keyword to set the SPI (Security Parameters Index).
< 256-
4294967295 >
Specify an SPI (Security Parameters Index) value in the range 256
to 4294967295, entered as a decimal integer.
md5
Specify the MD5 (Message-Digest 5) encryption algorithm.
< MD5-key >
Enter an MD5 key containing 32 hexadecimal characters.
sha1
Specify the SHA-1 (Secure Hash Algorithm 1) encryption
algorithm.
< SHA1-key >
Enter an SHA-1 key containing 40 hexadecimal characters.