C613-50170-01 Rev B
Command Reference for x510 Series
1973
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
UBLIC
K
EY
I
NFRASTRUCTURE
C
OMMANDS
SHOW
CRYPTO
PKI
TRUSTPOINT
show crypto pki trustpoint
Overview
Use this command to display information about the specified trustpoint.
Syntax
show crypto pki trustpoint [<
trustpoint
>]
Default
By default, all trustpoints are shown.
Mode
Privileged Exec
Usage
If no trustpoint is specified, information about all trustpoints is shown. The
command displays the authentication status of the trustpoint, the fingerprint of
the root CA certificate (if it exists), the enrollment status of the local server with the
trustpoint, a list of any applications that are configured to use the trustpoint, and
the trustpoint parameters that were configured from trustpoint-configuration
mode.
The specified trustpoints must already exist.
Example
To show the details of the trustpoint “example”, use the following commands:
awplus>
enable
awplus#
show crypto pki trustpoint example
Output
Figure 46-4:
Example output from
show crypto pki trustpoint
Related
Commands
Parameter
Description
<trustpoint>
The name of the trustpoint to be shown
awplus> enable
awplus# show crypto pki trustpoint example
--------------------
Trustpoint "example"
Type : Self-signed certificate authority
Root Certificate: 50C1856B EEC7555A 0F3A61F6 690D9463 67DF74D1
Local Server : The server is enrolled to this trustpoint.
Server Key : example-server-key
Applications : RADIUS
Authentication and Enrollment Parameters:
Enrollment : selfsigned
RSA Key Pair : example-server-key (2048 bits)
--------------------
