Allied Telesis x510-28GPX, Справочник по командам

Страница: 1571 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1571
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IP
V
6 H
ARDWARE
A
CCESS
C
ONTROL
L
IST
(ACL) C
OMMANDS
(
NAMED
IP
V
6
HARDWARE
ACL: IP
V
6
PACKET ENTRY
)
(named IPv6 hardware ACL: IPv6 packet
entry)
Overview Use this command to add an IPv6 packet filter entry to the current hardware
access-list. The filter will match on IPv6 packets that have the specified source and
destination IPv6 address and (optionally) prefix. You can use the value
any instead
of source or destination IPv6 address if an address does not matter.
The no variant of this command removes a filter entry from the current hardware
access-list. You can specify the filter entry for removal by entering either its
sequence number (e.g.
no 100 ), or by entering its filter profile without specifying
its sequence number (e.g. no deny ipv6 2001:0db8::0/64 any ).
You can find the sequence number by running the show ipv6 access-list (IPv6
Hardware ACLs) command.
Hardware ACLs will permit access unless explicitly denied by an ACL action.
Syntax
[< sequence-number >] < action > ipv6 < source-addr > < dest-addr >
[vlan < 1-4094 >]
no < sequence-number >
no < action > ipv6 < source-addr > < dest-addr > [vlan < 1-4094 >]
Parameter Description
< sequence-

number >
The sequence number for the filter entry of the selected access
control list, in the range 1-65535.
<action>
The action that the switch will take on matching packets:
deny
Reject packets that match the
source and destination filtering
specified with this command.
permit
Permit packets that match the
source and destination filtering
specified with this command.
copy-to-cpu
Send a copy of matching packets
to the CPU.
copy-to-mirror
Send a copy of matching packets
to the mirror port.
Use the
mirror interface command
to configure the mirror port.
send-to-mirror
Send matching packets to the
mirror port.
Use the
mirror interface command
to configure the mirror port.