Allied Telesis x510-28GPX, Справочник по командам

Страница: 118 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 118
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
COPY
(
FILENAME
)
copy (filename)
Overview This command copies a file. This allows you to:
• copy files from your device to a remote device
• copy files from a remote device to your device
• copy files stored on Flash memory to or from a different memory type, such
as a USB storage device
• create two copies of the same file on your device
Syntax
copy [force] < source-name > < destination-name >
Mode Privileged Exec
Examples To use TFTP to copy the file “bob.key” into the current directory from the remote
server at 10.0.0.1, use the command:
awplus# copy tftp://10.0.0.1/bob.key bob.key
To use SFTP to copy the file “new.cfg” into the current directory from a remote
server at 10.0.1.2, use the command:
awplus# copy sftp://10.0.1.2/new.cfg bob.key
To use SCP with the username “beth” to copy the file old.cfg into the directory
config_files on a remote server that is listening on TCP port 2000, use the
command:
awplus# copy scp://beth@serv:2000/config_files/old.cfg old.cfg
To copy the file “newconfig.cfg” onto your device’s Flash from a USB storage
device, use the command:
awplus# copy usb:/newconfig.cfg flash:/newconfig.cfg
To copy the file “newconfig.cfg” to a USB storage device from your device’s Flash,
use the command:
awplus# copy flash:/newconfig.cfg usb:/newconfig.cfg
Parameter Description
force
This parameter forces the copy command to overwrite the
destination file, if it already exists, without prompting the
user for confirmation.
If you specify
force , you can copy files to multiple AMF
nodes through a working-set.
<source-name>
The filename and path of the source file. See Introduction
on page 106 for valid syntax.
<destination-name>
The filename and path for the destination file. See
Introduction on page 106 for valid syntax.