Allied Telesis x510-28GPX, Справочник по командам

Страница: 2474 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2474
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
D
YNAMIC
H
OST
C
ONFIGURATION
P
ROTOCOL
(DHCP) C
OMMANDS
SHOW COUNTER DHCP
-
CLIENT
show counter dhcp-client
Overview This command shows counters for the DHCP client on your device.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax show counter dhcp-client
Mode User Exec and Privileged Exec
Example To display the message counters for the DHCP client on your device, use the
command:
awplus# show counter dhcp-client
Output Figure 55-1: Example output from the show counter dhcp-client command
Related
Commands
ip address dhcp
show counter dhcp-client


DHCPDISCOVER out ......... 10

DHCPREQUEST out ......... 34

DHCPDECLINE out ......... 4

DHCPRELEASE out ......... 0

DHCPOFFER in ......... 22

DHCPACK in ......... 18

DHCPNAK in ......... 0
Table 1: Parameters in the output of the show counter dhcp-client command
Parameter Description
DHCPDISCOVER out
The number of DHCP Discover messages sent by the client.
DHCPREQUEST out
The number of DHCP Request messages sent by the client.
DHCPDECLINE out
The number of DHCP Decline messages sent by the client.
DHCPRELEASE out
The number of DHCP Release messages sent by the client.
DHCPOFFER in
The number of DHCP Offer messages received by the client.
DHCPACK in
The number of DHCP Acknowledgement messages received
by the client.
DHCPNAK in
The number of DHCP Negative Acknowledgement
messages received by the client.