Allied Telesis x510-28GPX, Справочник по командам

Страница: 2341 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2341
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW ATMF AREA GUESTS
-
DETAIL
Related
Commands
show atmf area nodes-detail
show atmf area guests
Table 10: Parameters shown in the output of the show atmf guest detail
command
Parameter Description
Node Name
The name of the guest’s parent node.
Port Name
The port on the parent node that connects to the guest.
IFindex
An internal index number that maps to the port number
on the parent node.
Guest Description
A brief description of the guest node as manually entered
into the
description (interface) command for the guest
node port on the parent node.
Device Type
The device type as supplied by the guest node itself.
Backup Supported
Indicates whether AMF supports backup of this guest
node.
MAC Address
The MAC address of the guest node.
IP Address
The IP address of the guest node.
IPv6 Address
The IPv6 address of the guest node.
HTTP Port
The HTTP port enables you to specify a port when
enabling http to allow a URL for the http user interface of
a Guest Node. This is determined by the
http-enable
command.
Firmware Version
The firmware version that the guest node is currently
running.