Allied Telesis x510-28GPX, Справочник по командам

Страница: 1760 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1760
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
UTHENTICATION
C
OMMANDS
AUTH
-
MAC AUTHENTICATION
auth-mac authentication
Overview This command overrides the default MAC-based authentication method on an
interface by allowing you to apply a user-defined named list.
Use the no variant of this command to remove the named list from the interface
and apply the default method.
Syntax
auth-mac authentication {default|< list-name >}
no auth-mac authentication
Default The default method list is applied to an interface by default.
Mode Interface Mode
Example To apply the named list 'vlan10_auth' on the
vlan10
interface, use the
commands:
awplus# configure terminal
awplus(config)# interface vlan10
awplus(config-if)# auth-mac authentication vlan10_auth
To remove the named list from the
vlan10
interface and set the authentication
method back to default , use the commands:
awplus# configure terminal
awplus(config)# interface vlan10
awplus(config-if)# no auth-mac authentication
Related
Commands
aaa authentication auth-mac
Parameter Description
default
Apply the default authentication method list
< list-name >
Apply a user-defined named list