Allied Telesis x510-28GPX, Справочник по командам

Страница: 2037 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2037
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
DHCP S
NOOPING
C
OMMANDS
SHOW IP SOURCE BINDING
show ip source binding
Overview Use this command to display static entries in the DHCP snooping database. These
are the entries that have been added by using the
ip source binding command.
Syntax show ip source binding
Mode User Exec and Privileged Exec
Example To display static entries in the DHCP snooping database information, use the
command:
awplus# show ip source binding
Related
Commands
ip source binding
show ip dhcp snooping binding
Table 59: Example output from the show ip source binding command
awplus# show ip source binding


IP Source Bindings:


Client MAC Expires

IP Address Address VLAN Port (sec) Type

----------------------------------------------------------------

1.1.1.1 0000.1111.2222 1 port1.0.1 Infinite Static

Table 60: Parameters in the output from the show ip source binding command
Parameter Description
Client IP
Address
The IP address of the DHCP client.
MAC Address
The MAC address of the DHCP client.
VLAN
The VLAN ID the packet is received on.
Port
The Layer 2 port name the packet is received on.
Expires (sec)
Always infinite for static bindings, or when the leave time in
the DHCP message was 0xffffffff (infinite).
Type
DHCP Snooping binding type: Static