Allied Telesis x510-28GPX, Справочник по командам

Страница: 2636 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2636
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
LLDP C
OMMANDS
LOCATION CIVIC
-
LOCATION IDENTIFIER
location civic-location identifier
Overview Use this command to enter the Civic Address Location Configuration mode to
configure the specified location.
Use the no variant of this command to delete a civic address location. This also
removes the location from any ports it has been assigned to.
Syntax
location civic-location identifier < civic-loc-id >
no location civic-location identifier < civic-loc-id >
Default By default there are no civic address locations.
Mode Global Configuration
Usage To configure the location information for this civic address location identifier, use
the
location civic-location configuration command. To associate this civic location
identifier with particular ports, use the location elin-location-id command.
Up to 400 locations can be configured on the switch for each type of location
information, up to a total of 1200 locations.
Examples To enter Civic Address Location Configuration mode for the civic address location
with ID 1, use the commands:
awplus# configure terminal
awplus(config)# location civic-location identifier 1
awplus(config-civic)#
To delete the civic address location with ID 1, use the commands:
awplus# configure terminal
awplus(config)# no location civic-location identifier 1
Related
Commands
location civic-location-id
location civic-location configuration
show location
show running-config lldp
Parameter Description
< civic-loc-id >
A unique civic address location ID, in the range 1 to 4095.