Allied Telesis x510-28GPX, Справочник по командам

Страница: 2665 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2665
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
LLDP C
OMMANDS
SHOW LOCATION
show location
Overview Use this command to display selected location information configured on the
switch.
Syntax show location {civic-location|coord-location|elin-location}
show location {civic-location|coord-location|elin-location}
identifier {<
civic-loc-id >|< coord-loc-id >|< elin-loc-id >}
show location {civic-location|coord-location|elin-location}
interface <
port-list >
Mode User Exec and Privileged Exec
Examples To display a civic address location configured on port1.0.1, use the command:
awplus# show location civic-location interface port1.0.1
To display coordinate location information configured on the identifier 1, use the
command:
awplus# show location coord-location identifier 1
Parameter Description
civic-location
Display civic location information.
coord-location
Display coordinate location information.
elin-location
Display ELIN location information.
< civic-loc-id >
Civic address location identifier, in the range 1 to 4095.
< coord-loc-id >
Coordinate location identifier, in the range 1 to 4095.
< elin-loc-id >
ELIN location identifier, in the range 1 to 4095.
< port-list >
Ports to display information about.
Table 66: Example output from the show location command
awplus# show location civic-location interface port1.0.1

Port ID Element Type Element Value

----------------------------------------------------------------

1.0.1 1 Country NZ

City Christchurch

Street-suffix Avenue

House-number 27

Primary-road-name Nazareth