Allied Telesis x510-28GPX, Справочник по командам

Страница: 2800 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2800
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
ING
-P
OLLING
C
OMMANDS
TIMEOUT
(
PING POLLING
)
timeout (ping polling)
Overview This command specifies the time in seconds that the polling instance waits for a
response to a ping packet. You may find a higher time-out useful in networks
where ping packets have a low priority.
The no variant of this command resets the set time out to the default of one
second.
Syntax timeout < 1-30 >
no timeout
Default The default is 1 second.
Mode Ping-Polling Configuration
Examples To specify the timeout as 5 seconds for ping-poll instance 43, use the commands:
awplus# configure terminal
awplus(config)# ping-poll 43
awplus(config-ping-poll)# timeout 5
To reset the timeout to its default of 1 second for ping-poll instance 43, use the
commands:
awplus# configure terminal
awplus(config)# ping-poll 43
awplus(config-ping-poll)# no timeout
Related
Commands
critical-interval
fail-count
normal-interval
ping-poll
sample-size
show ping-poll
up-count
Parameter Description
< 1-30 > Length of time, in seconds, that the polling instance waits for a
response from the polled device.