Allied Telesis x510-28GPX, Справочник по командам

Страница: 299 / 2822

8
C613-50170-01 Rev B Command Reference for x510 Series 299
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Pluggables and
Cabling Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
and monitor Pluggables and Cabling, including:
• Cable Fault Locator for finding faults in copper cabling
• Optical Digital Diagnostic Monitoring (DDM) to help find fiber issues when
links go down
• Active Fiber Monitoring for detecting changes in optical power received over
fiber cables.
For more information, see the Pluggables and Cabling Feature Overview and
Configuration Guide .
Command List • “ clear test cable-diagnostics tdr ” on page 300
• “ debug fiber-monitoring ” on page 301
• “ fiber-monitoring action ” on page 303
• “ fiber-monitoring baseline ” on page 304
• “ fiber-monitoring enable ” on page 306
• “ fiber-monitoring interval ” on page 307
• “ fiber-monitoring sensitivity ” on page 308
• “ show system fiber-monitoring ” on page 310
• “ show system pluggable ” on page 313
• “ show system pluggable detail ” on page 315
• “ show system pluggable diagnostics ” on page 318
• “ show test cable-diagnostics tdr ” on page 320
• “ test cable-diagnostics tdr interface ” on page 321