C613-50170-01 Rev B
Command Reference for x510 Series
357
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
C
ONNECTIVITY
F
AULT
M
ANAGEMENT
C
OMMANDS
SHOW
ETHERNET
CFM
MAINTENANCE
-
POINTS
LOCAL
MEP
To show details of a specific Local MEP on an MA and its associated MD, use the
command:
awplus#
show ethernet cfm maintenance-points local mep domain
MD-INST1 service MA-INST1-1 mep 12 details
Output
Figure 9-6:
Example output from
show ethernet cfm maintenance-points
local mep interface port1.0.2
awplus#show ethernet cfm maintenance-points local mep interface
port1.0.2
Service Name MEPID Dir Interface State Defect
------------------------------------------------------------------
MA-INST1-1 12 D port1.0.2 En ..3..
Table 9-4: Parameters in the output from
show ethernet cfm
maintenance-points local mep interface <interface-name>
Parameter
Description
Service Name
The MA service name.
MEPID
The MEP ID of the local MEP of interest within the MA.
Dir
The direction of this local MEP:
D - Down MEP.
U - Up MEP.
Note: Only Down is currently supported.
Interface
The interface on which the local MEP resides.
State
Whether the local MEP's CCM processing is enabled “En”
or disabled “Dis”.
Defect
Defect bit list <dbl> indicating which of 5 possible defects
are currently being detected with each bit showing the
detected <defect-number> or . if there is no defect.
