Allied Telesis x510-28GPX, Справочник по командам

Страница: 1381 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1381
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM
V
6 C
OMMANDS
DEBUG IPV
6
PIM SPARSE
-
MODE TIMER
Default By default, all debugging is disabled.
Mode Privileged Exec and Global Configuration
Examples To enable debugging for the PIM-SMv6 Bootstrap Router bootstrap timer, use the
commands:
awplus(config)# debug ipv6 pim sparse-mode timer bsr bst
To enable debugging for the PIM-SMv6 Hello: neighbor liveness timer, use the
command:
awplus(config)# debug ipv6 pim sparse-mode timer hello ht
To enable debugging for the PIM-SMv6 Joinprune expiry timer, use the command:
awplus# debug ipv6 pim sparse-mode timer joinprune et
To disable debugging for the PIM-SMv6 Register timer, use the command:
awplus# no debug ipv6 pim sparse-mode timer register
Related
commands
show debugging ipv6 pim sparse-mode
kat
Enable or disable debugging for the JoinPrune timer: KeepAlive Timer.
ot
Enable or disable debugging for the JoinPrune timer: Upstream Override
Timer.
register
Enable or disable debugging for the Register timers.
rst
Enable or disable debugging for the Register timer: Register Stop Timer.
Parameter Description