C613-50170-01 Rev B
Command Reference for x510 Series
546
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
WITCHING
C
OMMANDS
SHOW
PLATFORM
show platform
Overview
This command displays the settings configured by using the
platform
commands.
Syntax
show platform
Mode
Privileged Exec
Usage
This command displays the settings in the running config. For changes in some of
these settings to take effect, the device must be rebooted with the new settings in
the startup config.
Example
To check the settings configured with
platform
commands on the device, use the
following command:
awplus#
show platform
Output
Figure 15-7:
Example output from the
show platform
command
awplus# show platform
MAC vlan hashing algorithm crc32l
L3 hashing algorithm crc32l
stop-unreg-mc-flooding off
Vlan-stacking TPID 0x8100
Hardware Filter Size ipv4-limited-ipv6
Table 16:
Parameters in the output of the
show platform
command
Parameter
Description
MAC vlan hashing
algorithm
The MAC VLAN hash-key-generating algorithm (set with
the
platform mac-vlan-hashing-algorithm
command). The
default algorithm is crc32l. The algorithm may need to be
changed in rare circumstances in which hash collisions
occur.
L3 hashing algorithm
The L3 VLAN hash-key-generating algorithm (set with the
platform l3-vlan-hashing-algorithm
command). The
default algorithm is crc32l. The algorithm may need to be
changed in rare circumstances in which hash collisions
occur.
stop-unreg-mc-flooding
Whether the stop-unreg-mc-flooding feature is on or off
(set with the
platform stop-unreg-mc-flooding
command). This feature prevents flooding of unregistered
multicast packets in the occasional situations in which
IGMP snooping does not prevent it.
