C613-50170-01 Rev B
Command Reference for x510 Series
740
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
OWER
OVER
E
THERNET
C
OMMANDS
SHOW
POWER
-
INLINE
show power-inline
Overview
This command displays the Power over Ethernet (PoE) status for all ports.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show power-inline
Mode
User Exec and Privileged Exec
Example
To display the PoE status for all ports, use the following command:
awplus#
show power-inline
Output
Figure 19-2:
Example output from
show power-inline
awplus#show power-inline
PoE Status:
Nominal Power: 370W
Power Allocated: 246W
Actual Power Consumption: 151W
Operational Status: On
Power Usage Threshold: 80% (296W)
PoE Interface:
Interface Admin Pri Oper Power Device Class Max(mW)
port1.0.1 Enabled Low Powered 3840 n/a 1 4000 [C]
port1.0.2 Enabled High Powered 6720 n/a 2 7000 [C]
port1.0.3 Enabled Low Powered 14784 n/a 3 15400 [C]
port1.0.4 Enabled Crit Powered 14784 n/a 3 15400 [C]
port1.0.5 Enabled Crit Powered 3840 n/a 1 4000 [C]
...
Table 1:
Parameters in the
show power-inline
command output
Parameter
Description
Nominal Power
The nominal power available on the switch in watts (W).
Power Allocated
The current power allocated in watts (W) that is available to
be drawn by any connected Powered Devices (PDs). This is
updated every 5 seconds.
Actual Power
Consumption
The current power consumption in watts (W) drawn by all
connected Powered Devices (PDs). This is updated every 5
seconds.
