C613-50170-01 Rev B
Command Reference for x510 Series
1049
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF C
OMMANDS
SHOW
IP
OSPF
DATABASE
NETWORK
show ip ospf database network
Overview
Use this command to display information about the network LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip ospf database network [
<adv-router-id>
]
[self-originate|
<adv-router-id>
]
Mode
User Exec and Privileged Exec
Examples
awplus#
show ip ospf database network 1.2.3.4 self-originate
awplus#
show ip ospf database network self-originate
awplus#
show ip ospf database network 1.2.3.4 adv-router 2.3.4.5
Output
Figure 27-8:
Example output from the
show ip ospf database network
command
Parameter
Description
<adv-router-id>
The router ID of the advertising router, in IPv4 address format.
Note however, that this no longer represents a real address.
self-originate
Displays self-originated link states.
adv-router
Displays all the LSAs of the specified router.
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
LS age: 1387
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.10.10.9 (address of Designated Router)
Advertising Router: 192.30.30.3
LS Seq Number: 80000001
Checksum: 0xe1b0
Length: 32
Network Mask: /24
Attached Router: 192.20.20.1
Attached Router: 192.30.30.3
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
...
