Allied Telesis x510-28GPX, Справочник по командам

Страница: 135 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 135
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
IPV
6
TFTP SOURCE
-
INTERFACE
ipv6 tftp source-interface
Overview Use this command to manually specify the IPv6 address that all TFTP requests
originate from. This is useful in network configurations where TFTP servers only
accept requests from certain devices, or where the server cannot dynamically
determine the source of the request.
Use the no variant of this command to stop specifying a source.
Syntax ipv6 tftp source-interface [ <interface> | <ipv6-add> ]
no ipv6 tftp source-interface
Default There is no default source specified.
Mode Global Configuration
Usage This command is helpful in network configurations where TFTP traffic needs to
traverse point-to-point links or subnets within your network, and you do not want
to propagate those point-to-point links through your routing tables.
In those circumstances, the TFTP server cannot dynamically determine the source
of the TFTP request, and therefore cannot send the requested data to the correct
device. Specifying a source interface or address enables the TFTP server to send the
data correctly.
Example To specify that TFTP requests originate from the IPv6 address 2001:db8::8a2e:7334,
use the following commands:
awplus# configure terminal
awplus(config)# ipv6 tftp source-interface 2001:db8::8a2e:7334
Related
Commands
copy (filename)
Parameter Description
<interface>
The VLAN that TFTP requests originate from. The device will use
the IPv6 address of this interface as its source IPv6 address.
<ipv6-add>
The IPv6 address that TFTP requests originate from, in the format
x:x::x:x, for example, 2001:db8::8a2e:7334.