C613-50170-01 Rev B
Command Reference for x510 Series
2386
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
LINKS
GUEST
DETAIL
Output
Figure 54-21: Example output from
show atmf links guest detail
node1#show atmf links guest detail
Detailed Guest Link Information:
Interface : port1.0.13
Link State : Down
Class Name : test
Model Type : Other
Discovery Method : Static
IP Address : 192.168.1.13
Node State : Down
Interface : port1.0.17
Link State : Full
Class Name : access
Model Type : TQ
Discovery Method : Dynamic
IP Address : 192.168.5.8
Username : manager
Node State : Full
Backup Supported : Yes
MAC address : 001a.ebad.ce60
Device Type : AT-TQ3400
Description : node1-1.0.17
Firmware Version : 3.2.1 A02
Table 54-2: Parameters in the output from
show atmf links guest detail
Parameter
Description
Interface
The port on the parent node that connects to the guest.
Link State
The state of the link to the guest node; one of:
•
Down: The physical link is down.
•
Up: The physical link has come up, but it is still during a
timeout period that is enforced to allow other links to
come up.
•
Learn: The timeout period described above has
elapsed, and the link is now learning information from
the AMF guest node. You can see what information it is
learning from the “Node State” field below.
•
Full: The node connected by this link has joined the
AMF network.
•
Fail: The port is physically up but something has
prevented the guest node from joining the AMF
network.
Class Name
The name of the ATMF guest-class that has been assigned
to the guest node by the
command.
