C613-50170-01 Rev B
Command Reference for x510 Series
2340
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
AREA
GUESTS
-
DETAIL
show atmf area guests-detail
Overview
This command displays the local and remote guest information from an AMF
controller.
Syntax
show atmf area guests-detail [<
area-name
> [<
node-name
>]]
Default
N/A.
Mode
Privileged Exec
Example
To display detailed information for all guest nodes attached to “node1”, which is
located within the area named “northern”, use the following command:
AMF_controller#
show atmf area guests-detail northern node1
Output
Figure 54-9:
Example output from the
show atmf guest detail
command.
Parameter
Description
<
area-name
>
The name assigned to the AMF area. An area is an AMF network
that is under the control of an AMF Controller.
<
node-name
>
The name assigned to the network node.
#show atmf guest detail
Node Name : Node1
Port Name : port1.0.5
Ifindex : 5005
Guest Description : tq4600
Device Type : AT-TQ4600
Configuration Mismatch : No
Backup Supported : Yes
MAC Address : eccd.6df2.da60
IP Address : 192.168.4.50
IPv6 Address : Not Set
HTTP Port : 80
Firmware Version :
Node Name : poe
Port Name : port1.0.6
Ifindex : 5006
Guest Description : tq3600
Device Type : AT-TQ2450
Configuration Mismatch : No
Backup Supported : Yes
MAC Address : 001a.eb3b.cb80
IP Address : 192.168.4.9
IPv6 Address : Not Set
HTTP Port : 80
Firmware Version :
