C613-50170-01 Rev B
Command Reference for x510 Series
1063
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF C
OMMANDS
SHOW
IP
OSPF
ROUTE
show ip ospf route
Overview
Use this command to display the OSPF routing table. Include the
ospf-id
parameter with this command to display the OSPF routing table for specified
instances.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip ospf [
<ospf-id>
] route
Mode
User Exec and Privileged Exec
Examples
To display the OSPF routing table, use the command:
awplus#
show ip ospf route
Output
Figure 27-21: Example output from the
show ip ospf route
command for a
specific process
Parameter
Description
<ospf-id>
<0-65535> The ID of the router process for which information will be
displayed. If this parameter is included, only the information for this
specified routing process is displayed.
OSPF process 1:
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
O 10.10.0.0/24 [10] is directly connected, vlan1, Area 0.0.0.0
O 10.10.11.0/24 [10] is directly connected, vlan2, Area 0.0.0.0
O 10.10.11.100/32 [10] is directly connected, lo, Area 0.0.0.0
E2 10.15.0.0/24 [10/50] via 10.10.0.1, vlan1
IA 172.16.10.0/24 [30] via 10.10.11.50, vlan2, Area 0.0.0.0
E2 192.168.0.0/16 [10/20] via 10.10.11.50, vlan2
