C613-50170-01 Rev B
Command Reference for x510 Series
310
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
LUGGABLES
AND
C
ABLING
C
OMMANDS
SHOW
SYSTEM
FIBER
-
MONITORING
show system fiber-monitoring
Overview
Use this command to display settings and current status for Active Fiber
Monitoring.
Syntax
show system fiber-monitoring
Mode
User Exec/Privileged Exec
Example
To display configuration and status for active fiber monitoring on ports, use the
command:
awplus#
show system fiber-monitoring
Output
Figure 8-2:
Example output from
show system fiber-monitoring
awplus#show sys fiber-monitoring
Fiber Monitoring Status
Reading units 0.0001mW
Stack member 1:
Interface port1.0.1
Status: enabled
Supported: Supported pluggable
Debugging: disabled
Interval: 2 seconds
Sensitivity: 1.00dB
Baseline type: average of last 35 values greater than 50
Status:
Baseline value: 496
Alarm threshold: 393
Alarm: no
Last 12 Readings: 498 498 498 498 498 498 498 498 498 498 498 498
Minimum reading: 486
Maximum reading: 498
Interface port1.0.2
Status: enabled
Supported: Supported pluggable
Debugging: disabled
Interval: 2 seconds
Sensitivity: 1.00dB
Baseline type: average of last 30 values greater than 50
Status:
Baseline value: 0
Alarm threshold: 0
Alarm: no
Last 12 Readings: 0 0 0 0 0 0 0 0 0 0 0 0
Minimum reading: 0
Maximum reading: 0
