C613-50170-01 Rev B
Command Reference for x510 Series
1060
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF C
OMMANDS
SHOW
IP
OSPF
INTERFACE
show ip ospf interface
Overview
Use this command to display interface information for OSPF.
For information on filtering and saving command output, see the
“Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide
.
Syntax
show ip ospf interface [<
interface-name
>]
Mode
User Exec and Privileged Exec
Examples
awplus#
show ip ospf interface vlan2
Output
Figure 27-17: Example output from the
show ip ospf interface
command
Parameter
Description
<
interface-name
>
The VLAN name, for example vlan3.
vlan2 is up, line protocol is up
Internet Address 1.1.1.1/24, Area 0.0.0.0, MTU 1500
Process ID 0, Router ID 33.33.33.33, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1, TE Metric 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Neighbor Count is 0, Adjacent neighbor count is 0
Crypt Sequence Number is 1106347721
Hello received 0 sent 1, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0
