Allied Telesis x510-28GPX, Справочник по командам

Страница: 1238 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1238
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IGMP
AND
IGMP S
NOOPING
C
OMMANDS
SHOW IP IGMP GROUPS
show ip igmp groups
Overview Use this command to display the multicast groups with receivers directly
connected to the router, and learned through IGMP.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax
show ip igmp groups [ <ip-address> |< interface > detail]
Mode User Exec and Privileged Exec
Example The following command displays local-membership information for all ports in all
interfaces:
awplus# show ip igmp groups
Output Figure 30-2: Example output from show ip igmp groups
Parameter Description
<ip-address>
Address of the multicast group, entered in the form A.B.C.D.
<interface>
Interface name for which to display local information.
IGMP Connected Group Membership

Group Address Interface Uptime Expires Last Reporter

224.0.1.1 port1.0.1 00:00:09 00:04:17 10.10.0.82

224.0.1.24 port1.0.2 00:00:06 00:04:14 10.10.0.84

224.0.1.40 port1.0.3 00:00:09 00:04:15 10.10.0.91

224.0.1.60 port1.0.3 00:00:05 00:04:15 10.10.0.7

224.100.100.100 port1.0.1 00:00:11 00:04:13 10.10.0.91

228.5.16.8 port1.0.3 00:00:11 00:04:16 10.10.0.91

228.81.16.8 port1.0.7 00:00:05 00:04:15 10.10.0.91

228.249.13.8 port1.0.3 00:00:08 00:04:17 10.10.0.91

235.80.68.83 port1.0.11 00:00:12 00:04:15 10.10.0.40

239.255.255.250 port1.0.3 00:00:12 00:04:15 10.10.0.228

239.255.255.254 port1.0.12 00:00:08 00:04:13 10.10.0.84
Table 30-1: Parameters in the output of show ip igmp groups
Parameter Description
Group
Address
Address of the multicast group.
Interface
Port through which the group is reachable.
Uptime
The time in weeks, days, hours, minutes, and seconds that this
multicast group has been known to the device.