C613-50170-01 Rev B
Command Reference for x510 Series
2408
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
TECH
Crosslink Sequence Number : 7
Domains Sequence Number : 28
Uplink Sequence Number : 2
Number of Crosslink Ports : 1
Number of Domain Nodes : 2
Number of Neighbors : 5
Number of Non Broadcast Neighbors : 3
Number of Link State Entries : 1
Number of Up Uplinks : 0
Number of Up Uplinks on This Node : 0
DBE Checksum : 84fc6
Number of DBE Entries : 0
...
Table 55:
Sample output from the
show atmf tech
command. (cont.)
Table 56:
Parameter definitions from the
show atmf tech
command
Parameter
Definition
ATMF Status
Shows status of AMF feature on the Node as
Enabled/Disabled.
Network Name
The name of the AMF network to which this node belongs.
Node Name
The name assigned to the node within the AMF network.
Role
The role configured on the device within the AMF - either master or member.
Current ATMF Nodes
A count of the AMF nodes in the AMF network.
Node Address
The identity of a node (in the format name.atmf ) that enables its access it from a
remote location.
Node ID
A unique identifier assigned to an AMF node.
Node Depth
The number of nodes in the path from this node to the core domain.
Domain State
A node’s state within an AMF Domain - either controller or backup.
Recovery State
The AMF node recovery status. Indicates whether a node recovery is in progress
on this device - either Auto, Manual, or None.
Management VLAN
The VLAN created for traffic between nodes of different domains (up/down
links).
VLAN ID - In this example VLAN 4092 is configured as the Management VLAN.
Management Subnet - the Network prefix for the subnet.
Management IP Address - the IP address allocated for this traffic.
Management Mask - the Netmask used to create a subnet for this traffic
255.255.128.0 (= prefix /17)
