C613-50170-01 Rev B
Command Reference for x510 Series
1225
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IGMP
AND
IGMP S
NOOPING
C
OMMANDS
IP
IGMP
SNOOPING
TCN
QUERY
SOLICIT
See the
IGMP Feature Overview and Configuration Guide
for introductory
information about the Query Solicitation feature.
NOTE
:
This command will function on the switch in the stand-alone mode, but it is not
supported when the device forms part of a VCS Stack.
Examples
To enable Query Solicitation on a device, use the commands:
awplus#
configure terminal
awplus(config)#
ip igmp snooping tcn query solicit
To disable Query Solicitation on a device, use the commands:
awplus#
configure terminal
awplus(config)#
no ip igmp snooping tcn query solicit
To enable Query Solicitation for vlan2, use the commands:
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
ip igmp snooping tcn query solicit
To disable Query Solicitation for vlan2, use the commands:
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
no ip igmp snooping tcn query solicit
Related
Commands
Command
issued from
Global
Configuration
Command issued
from Interface
Configuration
Device is STP Root
Bridge or the
EPSR Master Node
IGMP Query Solicit
message sent on VLAN
No
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
