C613-50170-01 Rev B
Command Reference for x510 Series
743
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
OWER
OVER
E
THERNET
C
OMMANDS
SHOW
POWER
-
INLINE
COUNTERS
show power-inline counters
Overview
This command displays Power over Ethernet (PoE) event counters for ports on the
Power Sourcing Equipment (PSE). The PoE event counters displayed can also be
accessed by objects in the PoE MIB (RFC 3621). See
Overview and Configuration Guide
for information about which PoE MIB objects
are supported.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show power-inline counters [<
port-list
>]
Mode
User Exec and Privileged Exec
Examples
To display all PoE event counters for all PoE ports, use the command:
awplus#
show power-inline counters
To display the PoE event counters for the port range 1.0.1 to 1.0.3, use the
command:
awplus#
show power-inline counters interface port1.0.1-1.0.3
Output
Figure 19-3:
Example output from the
show power-inline counters
command
Parameter
Description
<
port-list
>
Enter the PoE port(s) to display PoE event counters for them.
awplus#show power-inline counters interface port1.0.4-port1.0.12
PoE Counters:
Interface MPSAbsent Overload Short Invalid Denied
port1.0.4 0 0 0 0 0
port1.0.5 0 0 0 0 0
port1.0.6 0 0 0 0 0
port1.0.7 0 0 0 0 0
port1.0.8 0 0 0 0 0
port1.0.9 0 0 0 0 0
port1.0.10 0 0 0 0 0
port1.0.11 0 0 0 0 0
port1.0.12 0 0 0 0 0
