Yamaha RCX240, User Manual

Page: 53 / 620

3-8
Chapter 3 INSTALLATION
4
1
2
3
5
6
7
8
9
10
Chapter 3 INSTALLATION
3-9
4.3 AC power connector wiring
Strip the wire to expose 8 to 9 mm of bare lead.
8 to 9 mm
(1) Attach the lever to the
upper slot as shown and
press down on it with
your finger to depress
the internal spring.
(2) Insert the wire lead all the
way into the opening
while still holding the lever
down.
(3) Release the lever to make
the wiring connection. Pull
gently on the wire to make
sure it is securely
attached. (Do not pull
strongly on the wire.)
Lever
Screwdriver
You may insert the wire into the opening while pressing
down the internal spring with a flat-blade screwdriver.
c
CAUTION
Basically only one wire can be inserted into one wire hole.
4. Connecting to the power