Vodavi Starplus Triad-S, Manual

Page: 405 / 512

Programming LCR Tables B-17
Chapter - Least Cost Routing
2. Enter the range of
fixed
station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid
flexible
number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the LCR COS flexible button (Button #9) . The following message displays:
6. Enter a valid number (0–6) to correspond to the LCR Class of Service desired.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R S X X X PAG E A
E N T E R B U T T ON N U MB E R
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
X XX - X X X PAG E B
E N T E R B U T TO N N U M B E R S X X X PAG E B
E N T E R B U T T ON N U MB E R
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
LC R C LA S S OF S E R V I C E 0-6
0