2-84
CO Line - Ringing Options
Chapter 2 - Features and Operation
Queued CO Ringing Flash Rate
Description
The Queued CO Ringing flash rate is the rate at which a CO Line button or Loop button
flashes when a queued line becomes available. This flash rate can be programmed to
29 different options identified in the flash rate table. This enables the programmer to
customize the key system configuration to desired flash rates.
Programming Steps
1. Press the QUEUED CO RING flexible button
(FLASH 07, Button #11)
. The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to
Table 2-11 on page 2-130
.)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Queued CO Ringing flash rate is set for a Green 480 ipm Flutter (22).
Reminder Ring Timer
Description
When a CO line rings at a busy station, the call rings at the station using muted ringing. The
CO Line Ringing Option feature enables a user to receive a reminder ring instead of muted
ring. This timer provides a reminder ring every time the timer expires, as long as the incoming
CO line remains connected.
If the user continues their present conversation and the CO party does not hang up, the
Reminder Ring timer expires and the user receives another ring burst. When the key set user
ends the existing call, ringing for the CO call reverts to normal ringing.
The Reminder Ring Timer setting is variable from 00-99 seconds in 1-second increments.
Programming Steps
1. Press the REMINDER RING flexible button
(FLASH 01, Button #18)
. The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 00-99 seconds in 1-second
increments. A value of 00 disables the timer, therefore the user only receives one ring
burst at the beginning of the call.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Reminder Ring Timer is set to 00 second.
Q U E U E D CO R I N G
0 0-28
G R E E N 4 8 0 IP M F LU T T E R
R E M I N D E R R I N G
00- 99
0 0
Summary of Contents for Starplus Triad-S
