Vodavi Starplus Triad-S, Manual

Page: 99 / 512

CO Line - Incoming Ringing Assignment 2-73
Chapter 2 - Features and Operation
4. Press
FLASH 40, Page A, Button #13
to display ring assignments. Assignments are
displayed in sets of six, up to the number programmed. The following format displays the
assignments.
XDDDD = Destination type ID letter fllowed by number to be dialed:
[F]] plus Fixed Number, e.g., F102
[H] plus Hunt Group Number, e.g., H6700
[M] plus Modem Extension Number, e.g., M6099 (default = M499N)
[R] plus Recorded Announcement Extension Number, e.g., R6020
[S] plus Station Number, e.g., S6002
[U] plus UCD/ACD Group/Agent Number, e.g., U6034
[V] plus Voice Mail Group Number, e.g., V6899
[B] plus Speed Bin Number, e.g., B9990
RR:
[0] = No Ring
[D] = Day Ring
[N] = Night Ring
[DN] = Day/Night Ring
[S] = Special Only
[DS] = Day/Special
[NS] = Night/Special
[A] = All Modes (Day/Night/Special)
5. Press FLASH 40, Page A, Button #13 additional times to cycle to the next group of six
ring assignments. Ring assignments are displayed in numerical order, from the lowest to
the highest number.
Reseize Timer
Description
The Reseize Timer option lets the user adjust the Reseize Timer on a per CO Line basis. The
Reseize Timer can be used on any trunk type. This timer sets the time period that a trunk is
held disconnected after receiving a disconnect before being reseized when a device is
queued for a member of the trunk group.
Programming Steps
1. Press the RESEIZE TIMER Button
(FLASH 40, Page C, Button #3)
in the flexible button
field. The following message displays:
2. Enter a valid number on the dial pad that corresponds to 000–255 (0 ms to 2.55 seconds).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Reseize Timer is set for two seconds.
X DD D DR R X DD D DR R X DD D D RR
X DD D DR R X DD D DR R X DD D D RR
RE S E I ZE T I M E R 000 -2 55
20 0