Vodavi Starplus Triad-S, Manual

Page: 148 / 512

2-122 Executive Override
Chapter 2 - Features and Operation
A separate condition has been added to this feature which allows or disallows an Executive to
override an extension. This prevents an extension with override capability from overriding an
Executive’s station.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51] . Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Use of this feature when the Executive Override warning tone is disabled may be
interpreted as a violation of federal, state or local laws, and an invasion of privacy.
Check applicable laws in your area before intruding on calls using this feature.
A change in volume may occur on the CO line or intercom call after the barge-in
occurs.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
S TAT IO N AT T R IB UT E S
S E L E C T A S TAT I O N R A N G E E N T E R S TAT IO N N U M B E R
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R S X X X PAG E A
E N T E R B U T T ON N U MB E R
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number