Vodavi Starplus Triad-S, Manual

Page: 422 / 512

C-6 Database Programming Worksheets
Chapter - Customer Database Programming
Database Programming Worksheets
Before attempting programming, it is strongly recommended that customer database
worksheets be prepared (Refer to
“Programming Tables” on page C-11 ). These worksheets
should become part of the permanent record of customer programming. Refer to the
following sections when preparing the worksheets.
Database Upload/Download Routine
The Database Upload/Download Routine (
FLASH 86
) provides a maintenance facility which
permits the user to download the database to a PC, when a software change is made or when
the system needs to be initialized and reprogrammed. The Upload/Download Routine
facilitates the programming of a database on an in-house system which is downloaded to a
PC and then uploaded to a system in the field.
After the system maintenance is completed, the file saved in the PC can then be uploaded to
the system.
Upload/Download through Remote Administration
First, connect one end of an RS-232C serial cable from the RS-232C connector on the MISB to
the desired Comm Port on the PC.
Figure C-3: KSU to PC Connection Configuration
Then load a communication software package (e.g., Hyperterminal) into the PC and complete
the following steps to reconfigure the system.
All trace modes such as: SMDR (Flash 21), ICLID (Flash56), and Maintenance Event
Traces MUST be turned off before a download is performed!
Default telephone type = 24-button model
Use a straight-through DB-9 to DB-9 (female to female) cable.
(DB-9) Connection PC Side (DB-9)
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9