Vodavi Starplus Triad-S, Manual

Page: 115 / 512

Conference 2-89
Chapter 2 - Features and Operation
Programming Steps
1. Press
FLASH
and dial
[50]
or dial
[51]
. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the CONFERENCE flexible button (Button #3) . The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Conference is enabled.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
S TAT IO N AT T R IB UT E S
S E L E C T A S TAT I O N R A N G E E N T E R S TAT IO N N U M B E R
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R S X X X PAG E A
E N T E R B U T T ON N U MB E R
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
CO N F E RE N C E 0-1
E N A B L E D