Vodavi Starplus Triad-S, Manual

Page: 380 / 512

A-8 ICLID Programming
Chapter - ICLID / Caller ID
Enable / Disable
Description
The ICLID (Incoming Calling Line IDentification) feature was added to the Triad-S system. These
features are unavailable unless the Basic ICLID Software package was purchased separately.
For this feature to operate properly, it must be activated from the Central Office so the
numbers of the calling party are delivered over the individual tip and ring of the CO lines
during the first silent interval between ringing.
Programming Steps
1. Press the DISABLE/ENABLE flexible button (FLASH 56, Button #1) to toggle between the
options of NO for disable and YES for enable.
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … ICLID is disabled (NO option).
Name in Display
Description
The system can be set to display the incoming telephone number or the person's name on
the LCD display.
Programming Steps
1. Press the NAME flexible button (FLASH 56, Button #2) to toggle between the options of
NO to show the name or YES to show the incoming telephone number in the LCD.
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … The system shows the telephone number on the LCD display (YES option).
Baud Rate Display
Description
The Triad-S system can provide ICLID input on the standard RS-232C of the optional MISB.
The baud rate is displayed as 150, 300, 600, 1200, 2400, 4800, 9600, or 19.2K baud.
Programming Steps
The ICLID baud rate is programmed using FLASH 15 Baud Rate assignments. The LCD
displays the current baud rate based on which number is assigned to the ICLID Port number.
DEFAULT … Baud Rate is 9600.
When FLASH 56, Button #3 is pressed, an error tone is received.