Vodavi Starplus Triad-S, Manual

Page: 77 / 512

Centrex/PBX 2-51
Chapter 2 - Features and Operation
Off-Hook Preference
Description
Telephones, key and SLT, may be programmed to have their personal Centrex line accessed
automatically just by lifting the handset or pressing the ON/OFF button (Speaker Button on
SLTs). Internal features to the
Triad-S are still made available to digital telephones by
accessing intercom before going off-hook. Refer to “Ring Down/Hot Line/Off-Hook Preference”
on page 2-204 .
Private Line Appearance
Description
The Triad-S allows for private line assignment on an unlimited basis. Each station may have
sole access to a particular outside line if desired and may also be assigned to receive
incoming ringing on that line. Refer to
“CO Line Group Programming” on page 2-66 , “Line Group
Access - Station” on page 2-64 , and “Flexible Button Assignment” on page 2-130 .
Programming
✳
, #, and Hook-Flashes into Speed Dial
Description
Many Centrex codes utilize a hook-flash followed by, in many cases, the digit [
✳
] and or [#].
The Triad-S allows programming of these codes as a part of system or station speed dial
sequences. Refer to “Speed Dial” on page 2-212 .
Centrex/PBX Flash
Description
Provides telephone users with the ability to terminate an outside call or transfer a call behind
a PBX or Centrex and restore dial tone without hanging up the handset. A FLASH button is
located on each digital telephone.
Operation
When connected to an outside line:
Press FLASH to disconnect outside line and reseize outside line dial tone.
SINGLE LINE TELEPHONE
Depress the hookswitch briefly; or if equipped with a flash key, depress it.
Conditions
»
8-button telephones can assign a FLASH button by using code [660].